|
|
|
| Features
| |
High Performance Grade
Excellent Good pigment dispersion
Excellent ink transfer and printability
Good film forming ability and adhesion
|
| Typical Properties
| | Appearance | Clear pellet | | Molecular Weight | 16,000 | | None Volatiles, wt% | >98 | | Acid Number, mgKOH/g | 235 | | Tg, °C | 80 | | Density, g/ml | 1.125 | | Softening Point, °C | 100 |
| | Applications |
Grindinding vehicle in water based ink to produce a high performance product
| Solution Preparation and Solution Properties
| The following formulations are offered as starting points of making resin solutions. The resin should be cut under atgitation by high-speed mixers. Although Soluryl-120 will dissolve ant room temperature, the solution process can be greatly accelerated by use of warm water up to 70°C| Soluryl-160 | 30.0 | | Monoethanol amine | 8 | | D.Water | 47 | | Wetting agent | 5 | | IPA/Ethyl Carbitol Acetate | 10 | | pH | 8.5 | | Viscositity, cps(25°C,Brookfield) | 1,000 |
|
| Safety Information
| | Soluryl-160 is not formulated to contain any hazardous or regulated materials such as lead, cadmium, mercury and chromium compounds. And raw materials and our manufacturing process for Soluryl-160 do not includ any hazardous or regulated materials. | |
|
The information given herein and other otherwise supplied to users is based on our general experience and where applicable, on the results of tests on samples of typeical manufacture. However, because of the many factors which are outside knowledge and control, which can effect the use of these products, users must rely on their own judgement and we cannot accept liability for any injury, loss or damaage resulting from relicance upon such information.
|
|